|
Name
|
Description
|
|
AddVerticesToXElement(XElement)
|
For internal use only.
(inherited from Entity).
|
|
AllVerticesInFrustum(FrustumParams)
|
(inherited from Entity).
|
|
AllVerticesInScreenPolygon(ScreenPolygonParams)
|
Tells if an entity is fully contained inside a polygon defined in screen coordinates.
(inherited from Entity).
|
|
Animate(int)
|
Gives a chance to derived classes to change the entity position/rotation at each timer tick.
(inherited from Entity).
|
|
CheckIsSmallArray(int)
|
Ensures that the IsSmall array is big enough to hold data for the specified number of viewports.
(inherited from Entity).
|
|
ClearSelectability(Stack<BlockReference>)
|
Clear the entity selectability status for the defined nested instance.
(inherited from Entity).
|
|
ClearSelectabilityForAllInstances()
|
Clears the selectability status for all instances.
(inherited from Entity).
|
|
ClearSelectionForAllInstances()
|
Clears the selection status for all instances.
(inherited from Entity).
|
|
ClearVisibility(Stack<BlockReference>)
|
Clear the entity visibility status for the defined nested instance.
(inherited from Entity).
|
|
ClearVisibilityForAllInstances()
|
Clears the visibility status for all instances.
(inherited from Entity).
|
|
Clone()
|
Creates a deep copy of this ifc linear path entity.
|
|
ClosestPointTo(Point3D, out double)
|
(inherited from LinearPath).
|
|
CombineBoundingBox(Transformation, Point3D, Point3D)
|
Combines the entity's bounding box with the given bounding box.
(inherited from Entity).
|
|
Compile(CompileParams)
|
Compiles the graphic representation of this entity.
(inherited from LinearPath).
|
|
CompilePattern(CompileParams)
|
Compiles the graphics representation of the pattern of wireframe entities.
(inherited from Entity).
|
|
CompileWire(CompileParams)
|
Compiles the graphics representation of wireframe entities.
(inherited from Entity).
|
|
ComputeBoundingBox(TraversalParams, out Point3D, out Point3D)
|
Computes the entity's bounding box.
|
|
ComputeBoundingBox(TraversalParams, IList<Point3D>, out Point3D, out Point3D)
|
Computes the entity's bounding box.
(inherited from Entity).
|
|
ComputeBoundingBox(TraversalParams, float[], int, out Point3D, out Point3D)
|
(inherited from Entity).
|
|
ComputeOffsetOnCameraAxes(OffsetOnCameraAxesParams)
|
Computes the intersection of the lines passing from the vertices and oriented like the frustum planes with the X and Y axes of the camera.
|
|
ComputeOffsetOnCameraAxes(OffsetOnCameraAxesParams, IList<Point3D>, int)
|
(inherited from Entity).
|
|
ComputeOffsetOnCameraAxes(Transformation, float[], int, Point2D, Point2D, Point2D, Point2D, int)
|
(inherited from Entity).
|
|
ConvertToLines()
|
Returns the linear path individual lines array.
(inherited from LinearPath).
|
|
ConvertToSurrogate()
|
Converts the entity to its surrogate, for serialization purpose.
|
|
CopyAttributes(Entity)
|
Copies the following attributes to this entity: Color, ColorMethod, LineWeight, LineTypePattern, LineTypeMethod, LineWeight, LineWeightMethod, LayerIndex and MaterialName.
(inherited from Entity).
|
|
CopyAttributesFast(Entity)
|
Copies the following attributes to this entity: Visible, InstanceVisibilityInfo, Color, ColorMethod, LayerIndex and MaterialName attributes.
(inherited from Entity).
|
|
CreateHelix(double, double, double, bool, double)
|
Creates a Linear path in the form of an Helix.
(inherited from LinearPath).
|
|
Dispose()
|
Cleans up graphics resources, like display lists, textures, etc.
(inherited from LinearPath).
|
|
Draw(DrawParams)
|
Draws the entity.
(inherited from LinearPath).
|
|
DrawDirection(DrawDirectionParams)
|
Draws a small arrow to show the entity direction if DrawCurveDirection is true.
(inherited from LinearPath).
|
|
DrawEdges(DrawParams)
|
Draws the entity's edges.
(inherited from Entity).
|
|
DrawEntity(RenderContextBase, object)
|
Internal method that draws the entity.
(inherited from Entity).
|
|
DrawFast(DrawParams)
|
Draws the entity in fast inaccurate transparency mode.
(inherited from Entity).
|
|
DrawFlat(DrawParams)
|
Draws entity in displayType.Flat DisplayMode.
(inherited from Entity).
|
|
DrawFlatFast(DrawParams)
|
Draws the entity in flat and fast inaccurate transparency mode.
(inherited from Entity).
|
|
DrawFlatSelected(DrawParams)
|
Draws entity selected in displayType.Flat DisplayMode.
(inherited from Entity).
|
|
DrawForSelection(GfxDrawForSelectionParams)
|
Draws the entity without specifing any color.
(inherited from Entity).
|
|
DrawForSelectionEdges(GfxDrawForSelectionParams)
|
Draws the entity edges in false-colors (for some kinds of entities only).
(inherited from Entity).
|
|
DrawForSelectionFaces(GfxDrawForSelectionParams)
|
Draws the entity faces in false-colors (for some kinds of entities only).
(inherited from Entity).
|
|
DrawForSelectionVertices(GfxDrawForSelectionParams)
|
Draws the entity vertices in false-colors (for some kinds of entities only).
(inherited from Entity).
|
|
DrawForSelectionWireframe(GfxDrawForSelectionParams)
|
Draws entity as wires without specifing any color.
(inherited from Entity).
|
|
DrawForShadow(RenderParams)
|
Draws the entity planar shadow.
(inherited from LinearPath).
|
|
DrawHiddenLines(DrawParams)
|
Draw the entity in the displayType.HiddenLines display mode.
(inherited from Entity).
|
|
DrawHiddenLinesFast(DrawParams)
|
Draw the entity in the displayType.HiddenLines display mode in fast inaccurate transparency mode.
(inherited from Entity).
|
|
DrawHiddenLinesMaterial(RenderParams)
|
(inherited from Entity).
|
|
DrawHiddenLinesMaterialFast(RenderParams)
|
(inherited from Entity).
|
|
DrawIsocurves(DrawParams)
|
Draws the entity iso curves. For Mesh entities this method draws internal wires.
(inherited from Entity).
|
|
DrawIsocurvesForFlat(DrawParams)
|
Draws the isocurves in Flat display mode.
(inherited from Entity).
|
|
DrawNormals(DrawParams)
|
Draws entity's normal vectors.
(inherited from Entity).
|
|
DrawOnScreen(DrawOnScreenParams)
|
Draws extra things on screen, like the vertex indices (if Viewport.ShowVertexIndices is true).
|
|
DrawOnScreen(DrawOnScreenParams, int)
|
Draws extra things on screen, like the vertex indices (if Viewport.ShowVertexIndices is true).
|
|
DrawOnScreenWireframe(DrawOnScreenWireframeParams)
|
Draws extra things on screen, like the vertex Numbers (if Viewport.ShowVertexIndices is true) in wireframe display mode.
|
|
DrawOnScreenWireframe(DrawOnScreenWireframeParams, int)
|
Draws extra things on screen, like the vertex Numbers (if Viewport.ShowVertexIndices is true) in wireframe dispaly mode.
|
|
DrawSelected(DrawParams)
|
Draws entity selected.
(inherited from Entity).
|
|
DrawSelectedVertices(DrawParams)
|
Draws the entity selected vertices.
(inherited from Entity).
|
|
DrawSilhouettes(DrawSilhouettesParams)
|
Draws Silhouettes.
(inherited from Entity).
|
|
DrawVertices(DrawParams)
|
Draws entity's vertices.
(inherited from Entity).
|
|
DrawWire(DrawParams)
|
Draws a wireframe entity, resolving the LineTypeName for LineTypeMethod colorMethodType.byParent.
(inherited from Entity).
|
|
DrawWireEntity(RenderContextBase, object)
|
Draws the Wireframe entity.
(inherited from Entity).
|
|
DrawWireframe(DrawParams)
|
Draws entity as wires.
(inherited from Entity).
|
|
DrawWireframeSelected(DrawParams)
|
Draws entity as selected wires.
(inherited from Entity).
|
|
DrawWithPattern(RenderContextBase, object)
|
(inherited from LinearPath).
|
|
Dump()
|
Returns a description of this entity.
|
|
Equals(Object)
|
Determines whether the specified object is equal to the current object.
(inherited from Object).
|
|
EstimateBoundingBox(BlockKeyedCollection, LayerKeyedCollection)
|
Returns a small set of points that gives an idea of the entity bounding box.
(inherited from LinearPath).
|
|
EvaluateIntersectEdges(FrustumParams)
|
Tells if must evaluate the intersection of the edges with the frustum.
(inherited from Entity).
|
|
EvaluateIntersectTriangles(FrustumParams)
|
Tells if must evaluate the intersection of the triangles with the frustum.
(inherited from Entity).
|
|
ExtrudeAsBrep(Line, double)
|
|
|
ExtrudeAsBrep(Vector3D, double, double)
|
|
|
ExtrudeAsBrep(double, double, double, double)
|
|
|
ExtrudeAsMesh(Vector3D, double, natureType)
|
|
|
ExtrudeAsMesh(double, double, double, double, natureType)
|
|
|
ExtrudeAsMesh<T>(Vector3D, double, natureType)
|
|
|
ExtrudeAsMesh<T>(double, double, double, double, natureType)
|
|
|
ExtrudeAsSolid(Vector3D, double)
|
|
|
ExtrudeAsSolid(double, double, double, double)
|
|
|
ExtrudeAsSurface(Line)
|
|
|
ExtrudeAsSurface(Vector3D)
|
|
|
ExtrudeAsSurface(Vector3D, double, double)
|
|
|
ExtrudeAsSurface(double, double, double)
|
|
|
Finalize
|
Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(inherited from Object).
|
|
FindClosestTriangle(Transformation, Segment3D, IList<Point3D>, IList<IndexTriangle>, int, int, int, SortedList<DoubleHitTriangle>)
|
Finds the triangles intersecting the seg segment and puts them in the triList.
|
|
FindClosestTriangle(Transformation, Segment3D, float[], int[], int, int, int, SortedList<DoubleHitTriangle>)
|
Finds the closest triangle using float arrays for vertices and int arrays for triangles.
|
|
FrustumEdgesTriangleIntersection(Segment3D[], Point3D, Point3D, Point3D)
|
(inherited from Entity).
|
|
GetBb(out Point3D, out Point3D)
|
(inherited from LinearPath).
|
|
GetClosestMainAxis(Vector3D)
|
(inherited from Entity).
|
|
GetHashCode
|
Serves as the default hash function.
(inherited from Object).
|
|
GetIndividualCurves()
|
(inherited from LinearPath).
|
|
GetLengthFromParam(double, out double)
|
(inherited from LinearPath).
|
|
GetNormalLength()
|
Gets the entity normal length.
(inherited from Entity).
|
|
GetNurbsForm()
|
(inherited from LinearPath).
|
|
GetObjectData(SerializationInfo, StreamingContext)
|
Populates a SerializationInfo instance with the data needed to serialize the target object.
|
|
GetOffsetDistance(Vector3D, Vector3D, double)
|
Computes the offset distance for the extrude with draft angle methods.
(inherited from Entity).
|
|
GetParamFromLength(double, double, out double)
|
|
|
GetParamFromLength(double, out double)
|
|
|
GetPointsByLength(double)
|
Subdivides the curve by the distance provided.
(inherited from LinearPath).
|
|
GetPointsByLengthPerSegment(double)
|
Subdivides each segment of the curve by the distance provided.
(inherited from LinearPath).
|
|
GetPointsForBb()
|
(inherited from LinearPath).
|
|
GetSelectability(Stack<BlockReference>)
|
Gets the entity selectability status.
(inherited from Entity).
|
|
GetSelection(Stack<BlockReference>)
|
Gets the entity selection status.
(inherited from Entity).
|
|
GetType
|
Gets the Type of the current instance.
(inherited from Object).
|
|
GetVisibility(Stack<BlockReference>)
|
Gets the entity visibility status.
(inherited from Entity).
|
|
GetXAttributes(bool)
|
For internal use only.
(inherited from Entity).
|
|
GetXElement(bool)
|
For internal use only.
(inherited from LinearPath).
|
|
Inflate(double, Vector3D, double)
|
Inflates this linear path of the desired amount.
|
|
Inflate(double, double)
|
Inflates this linear path of the desired amount.
|
|
InitGraphicsData()
|
Initialize the graphics data.
(inherited from Entity).
|
|
InsideFrustumPoint(PlaneEquation[], Transformation, IList<Point3D>, int)
|
(inherited from Entity).
|
|
InsideOrCrossingFrustum(FrustumParams)
|
(inherited from Entity).
|
|
InsideOrCrossingFrustumInternal(PlaneEquation[], Transformation, IList<Point3D>, int, int)
|
(inherited from Entity).
|
|
InsideOrCrossingScreenPolygon(ScreenPolygonParams)
|
(inherited from Entity).
|
|
InsideOrCrossingScreenPolygonInternal(ScreenPolygonParams, IList<Point3D>, int, int)
|
(inherited from Entity).
|
|
InsideOrCrossingScreenPolygonPoint(ScreenPolygonParams, IList<Point3D>, int)
|
(inherited from Entity).
|
|
IntersectWith(ICurve)
|
(inherited from LinearPath).
|
|
Intersects(Entity, bool, Transformation, Transformation)
|
Checks if two entity intersect geometrically
(inherited from Entity).
|
|
Intersects2D(Entity, bool, Transformation, Transformation)
|
Checks if two 2D entity intersect geometrically on Plane XY
(inherited from Entity).
|
|
IsAnyInstanceSelectable()
|
Tells if there is at least an instance selectable.
(inherited from Entity).
|
|
IsAnyInstanceSelected()
|
Tells if there is at least an instance selected.
(inherited from Entity).
|
|
IsAnyInstanceVisible()
|
Tells if there is at least an instance visible.
(inherited from Entity).
|
|
IsCrossing(FrustumParams)
|
Tells if the entity is inside or crossing the given planes and edges.
(inherited from Entity).
|
|
IsCrossingScreenPolygon(ScreenPolygonParams)
|
Tells if an entity is fully or partially contained inside a polygon defined in screen coordinates.
(inherited from Entity).
|
|
IsInFrustum(FrustumParams)
|
Tells if the entity is inside the frustum planes.
|
|
IsInFrustum(FrustumParams, Point3D, double)
|
Tells if the sphere surrounding the entity is inside the frustum planes.
|
|
IsInPlane(devDept.Geometry.Plane, double)
|
(inherited from LinearPath).
|
|
IsLinear(double, out Segment3D)
|
(inherited from LinearPath).
|
|
IsOrientedClockwise(devDept.Geometry.Plane)
|
Checks if the closed curve orientation is clockwise.
(inherited from LinearPath).
|
|
IsPlanar(double, out devDept.Geometry.Plane)
|
(inherited from LinearPath).
|
|
IsSelected(Stack<BlockReference>)
|
Obsolete.
Tells if the instance referred by the stack of parents is selected.
(inherited from Entity).
|
|
IsSmall(IsSmallParams)
|
Checks if an entity is small and can be skipped during the drawing.
|
|
IsSmall(int)
|
Tells if the entity screen size is smaller than Environment.SmallSize.
|
|
IsValid()
|
Returns true if all the entity fields contain reasonable information.
(inherited from LinearPath).
|
|
IsVisible(LayerKeyedCollection, attributeReferenceVisibilityType)
|
Check if the entity is visible for the selection.
(inherited from Entity).
|
|
IsVisibleAndInFrustum(Stack<BlockReference>, LayerKeyedCollection, attributeReferenceVisibilityType)
|
Check if the entity is visible.
(inherited from Entity).
|
|
Length()
|
Gets the linear path length.
(inherited from LinearPath).
|
|
MemberwiseClone
|
Creates a shallow copy of the current Object.
(inherited from Object).
|
|
MergeWith(LinearPath)
|
Merges this linear path with a consecutive linear path.
(inherited from LinearPath).
|
|
NormalAt(double)
|
(inherited from LinearPath).
|
|
Offset(double)
|
Offsets the curve of the specified amount.
|
|
Offset(double, Vector3D, double, bool)
|
|
|
OffsetToRegion(double, double, bool)
|
(inherited from LinearPath).
|
|
Pocket(double, devDept.Geometry.Plane)
|
Pocket function for NC toolpaths.
|
|
Pocket(double, devDept.Geometry.Plane, cornerType)
|
Pocket function for NC toolpaths.
|
|
Pocket(double, devDept.Geometry.Plane, cornerType, double, double)
|
Pocket function for NC toolpaths.
|
|
PointAt(double)
|
Evaluates a point on the linear path.
(inherited from LinearPath).
|
|
Project(Point3D, out double)
|
(inherited from LinearPath).
|
|
PropagateAttributes(Entity, Entity, bool)
|
Propagates the attributes to the entity passed as parameter.
(inherited from Entity).
|
|
QuickOffset(double, devDept.Geometry.Plane)
|
Quick offset function for NC toolpaths.
|
|
QuickOffset(double, devDept.Geometry.Plane, cornerType)
|
Quick offset function for NC toolpaths.
|
|
QuickOffset(double, devDept.Geometry.Plane, cornerType, double, double)
|
Quick offset function for NC toolpaths.
|
|
Regen(RegenParams)
|
This method is used for several purposes. For example in arcs and circles
is used to generate the curve's linear approximation, in meshes to compute normals
and edges and in Nurbs surfaces to generate the triangulation.
|
|
Regen(double)
|
Computes the curve or surface tessellation.
(inherited from Entity).
|
|
RegenNoChanges(double)
|
Computes an array of vertices according to the desired chordal error, without changing the entity's Vertices and RegenMode.
(inherited from Entity).
|
|
Render(RenderParams)
|
Renders the entity.
(inherited from Entity).
|
|
RenderFast(RenderParams)
|
Renders the entity in fast inaccurate transparency mode.
(inherited from Entity).
|
|
ResetIsSmallArray()
|
Resets the array of IsSmall flags.
(inherited from Entity).
|
|
Reverse()
|
(inherited from LinearPath).
|
|
RevolveAsBrep(double, double, Line, double)
|
|
|
RevolveAsBrep(double, double, Vector3D, Point3D, double)
|
|
|
RevolveAsMesh(double, double, Point3D, Point3D, int, double, natureType)
|
(inherited from LinearPath).
|
|
RevolveAsMesh<T>(double, double, Point3D, Point3D, int, double, natureType)
|
(inherited from LinearPath).
|
|
RevolveAsSolid(double, double, Vector3D, Point3D, int, double)
|
(inherited from LinearPath).
|
|
RevolveAsSurface(double, double, Line)
|
|
|
RevolveAsSurface(double, double, Vector3D, Point3D)
|
|
|
Rotate(double, Vector3D, Point3D)
|
Rotates the entity around an arbitray axis by the specified angle.
|
|
Scale(Point3D, double, double, double)
|
Scales the entity of the specified scale factor.
|
|
Scale(Point3D, double)
|
Scales the entity of the specified scale factor.
|
|
Scale(Vector3D)
|
Scales the entity of the specified scale factor.
|
|
Scale(double)
|
Scales the entity of the specified scale factor.
|
|
Scale(double, double, double)
|
Scales the entity of the specified scale factor.
|
|
SelectedInternal()
|
Tells if the entity has internal parts selected
(inherited from Entity).
|
|
SetEntityColorForFace(DrawParams, Color)
|
Sets the entity color or material depending on the color mode.
(inherited from Entity).
|
|
SetEntityColorForSelection(DrawParams)
|
Sets the entity color or material depending on the color mode.
(inherited from Entity).
|
|
SetLineWeight(RenderContextBase, float)
|
Line weight changer.
(inherited from Entity).
|
|
SetLineWeightForEdges(DrawEdgesParams)
|
(inherited from Entity).
|
|
SetLineWeightForSilhouettes(DrawSilhouettesParams)
|
(inherited from Entity).
|
|
SetSelectability(bool, Stack<BlockReference>)
|
Sets the entity selectability status.
(inherited from Entity).
|
|
SetSelection(bool, Stack<BlockReference>)
|
Sets the entity selection status.
(inherited from Entity).
|
|
SetSelectionColorForSelection(DrawParams)
|
Sets the selection color or material depending on the color mode.
(inherited from Entity).
|
|
SetShader(DrawParams)
|
Sets a Shader before drawing the entity.
(inherited from Entity).
|
|
SetVisibility(bool, Stack<BlockReference>)
|
Sets the entity visibility status.
(inherited from Entity).
|
|
SplitAt(double, out ICurve, out ICurve)
|
(inherited from LinearPath).
|
|
SplitAtDiscontinuities()
|
Splits the curve at derivative discontinuities (e.g. kinks), returns an array of the smooth segments that form the curve.
(inherited from LinearPath).
|
|
SplitBy(IList<Point3D>, out ICurve[])
|
|
|
SplitBy(Point3D, out ICurve, out ICurve)
|
|
|
SubCurve(Point3D, Point3D, out ICurve)
|
|
|
SubCurve(double, double, out ICurve)
|
|
|
SweepAsBrep(ICurve, double, sweepMethodType)
|
|
|
SweepAsBrep(ICurve, double, bool, sweepMethodType)
|
|
|
SweepAsMesh(ICurve, double, sweepMethodType, natureType)
|
|
|
SweepAsMesh(ICurve, double, bool, sweepMethodType, natureType)
|
|
|
SweepAsMesh<T>(ICurve, double, sweepMethodType, natureType)
|
|
|
SweepAsMesh<T>(ICurve, double, bool, sweepMethodType, natureType)
|
|
|
SweepAsSolid(ICurve, double, sweepMethodType)
|
|
|
SweepAsSolid(ICurve, double, bool, sweepMethodType)
|
|
|
SweepAsSurface(ICurve, double, sweepMethodType)
|
(inherited from LinearPath).
|
|
TangentAt(double)
|
(inherited from LinearPath).
|
|
ThroughTriangle(FrustumParams)
|
(inherited from Entity).
|
|
ThroughTriangleQuad(FrustumParams, IList<Point3D>)
|
Tells if the quad defined by the vertices is inside the selection area defined by the edge list.
(inherited from Entity).
|
|
ThroughTriangleScreenPolygon(ScreenPolygonParams)
|
|
|
ThroughTriangleScreenPolygon(Point3D, Point3D, Point3D, ScreenPolygonParams)
|
Checks whether a triangle intersects or is inside a 2D screen polygon.
|
|
ThroughTriangleScreenPolygonQuad(IList<Point3D>, ScreenPolygonParams)
|
Tells if the quad defined by the vertices is inside the selection area defined by the screen polygon.
(inherited from Entity).
|
|
ToString
|
Returns a string that represents the current object.
(inherited from Object).
|
|
TransformAllVertices(Transformation, bool, bool)
|
(inherited from Entity).
|
|
TransformBy(Transformation)
|
Transforms all the entity's vertices by the specified transformation.
(inherited from LinearPath).
|
|
Translate(double, double, double)
|
Translates the entity.
|
|
Translate(Vector3D)
|
Translates the entity.
|
|
TrimAt(double, bool)
|
(inherited from LinearPath).
|
|
TrimBy(Point3D, bool)
|
(inherited from LinearPath).
|
|
UpdateBoundingBox(TraversalParams)
|
Updates the entity's bounding box.
(inherited from Entity).
|
|
UpdateBoundingBoxSphere()
|
(inherited from Entity).
|
|
UpdateOrientedBoundingBox(TraversalParams)
|
Updates the entity's oriented bounding box or build it if not present.
|
|
UpdateOrientedBoundingBox(TraversalParams, bool)
|
Updates the entity's oriented bounding box or build it if not present.
|
|
WriteCSharp(TextWriter, int)
|
(inherited from LinearPath).
|
|
WriteObjAsLines(ref int, TextWriter, ref int, ref int, ref int, TextWriter, LayerKeyedCollection, string, MaterialKeyedCollection, double, double, BlockKeyedCollection)
|
Write in Obj file format as set of lines connecting vertices.
(inherited from Entity).
|
|
WriteUsemtl(int, TextWriter, TextWriter, LayerKeyedCollection)
|
|
|
WriteUsemtl(string, TextWriter)
|
|
|
WriteXml(XmlTextWriter)
|
(inherited from LinearPath).
|