|
Name
|
Description
|
|
AddVerticesToXElement(XElement)
|
For internal use only.
(inherited from Entity).
|
|
AllVerticesInFrustum(FrustumParams)
|
(inherited from Entity).
|
|
AllVerticesInScreenPolygon(ScreenPolygonParams)
|
Tells if an entity is fully contained inside a polygon defined in screen coordinates.
(inherited from Entity).
|
|
Animate(int)
|
Gives a chance to derived classes to change the entity position/rotation at each timer tick.
(inherited from Entity).
|
|
ClearSelectability(Stack<BlockReference>)
|
Clear the entity selectability status for the defined nested instance.
(inherited from Entity).
|
|
ClearSelectabilityForAllInstances()
|
Clears the selectability status for all instances.
(inherited from Entity).
|
|
ClearSelectionForAllInstances()
|
Clears the selection status for all instances.
(inherited from Entity).
|
|
ClearVisibility(Stack<BlockReference>)
|
Clear the entity visibility status for the defined nested instance.
(inherited from Entity).
|
|
ClearVisibilityForAllInstances()
|
Clears the visibility status for all instances.
(inherited from Entity).
|
|
Clone()
|
Creates a deep copy of this composite curve.
(inherited from CompositeCurve).
|
|
ClosestPointTo(Point3D, out double)
|
(inherited from CompositeCurve).
|
|
CombineBoundingBox(Transformation, Point3D, Point3D)
|
Combines the entity's bounding box with the given bounding box.
(inherited from Entity).
|
|
Compile(CompileParams)
|
Compiles the graphic representation of this entity.
(inherited from CompositeCurve).
|
|
CompilePattern(CompileParams)
|
Compiles the graphics representation of the pattern of wireframe entities.
(inherited from Entity).
|
|
CompileWire(CompileParams)
|
Compiles the graphics representation of wireframe entities.
(inherited from Entity).
|
|
ComputeBoundingBox(TraversalParams, out Point3D, out Point3D)
|
Computes the entity's bounding box.
(inherited from CompositeCurve).
|
|
ComputeOffsetOnCameraAxes(OffsetOnCameraAxesParams)
|
Computes the intersection of the lines passing from the vertices and oriented like the frustum planes with the X and Y axes of the camera.
(inherited from Entity).
|
|
ComputeOffsetOnCameraAxes(OffsetOnCameraAxesParams, IList<Point3D>, int)
|
(inherited from Entity).
|
|
ComputeOffsetOnCameraAxes(Transformation, float[], int, Point2D, Point2D, Point2D, Point2D, int)
|
(inherited from Entity).
|
|
ConvertToSurrogate()
|
Converts the entity to its surrogate, for serialization purpose.
(inherited from CompositeCurve).
|
|
CopyAttributes(Entity)
|
Copies the following attributes to this entity: Color, ColorMethod, LineWeight, LineTypeName, LineTypeMethod, LineWeight, LineWeightMethod, LayerName and MaterialName.
(inherited from Entity).
|
|
CopyAttributesFast(Entity)
|
Copies the following attributes to this entity: Visible, InstanceVisibilityInfo, Color, ColorMethod, LayerName and MaterialName attributes.
(inherited from Entity).
|
|
CreateCircularSlot(Plane, double, double, double)
|
Creates a composite curve with the shape of a circular slot by plane.
(inherited from CompositeCurve).
|
|
CreateCircularSlot(Plane, double, double, double, double)
|
Creates a composite curve with the shape of a circular slot by plane, position and start angle.
(inherited from CompositeCurve).
|
|
CreateCircularSlot(Plane, double, double, double, double, double)
|
Creates a composite curve with the shape of a circular slot by plane and position constructor.
(inherited from CompositeCurve).
|
|
CreateCircularSlot(Plane, double, double, double, double, double, double)
|
Creates a composite curve with the shape of a circular slot by plane, position and start angle.
(inherited from CompositeCurve).
|
|
CreateCircularSlot(double, double, double)
|
Creates a composite curve with the shape of a circular slot.
(inherited from CompositeCurve).
|
|
CreateCircularSlot(double, double, double, double)
|
Creates a composite curve with the shape of a circular slot by start angle.
(inherited from CompositeCurve).
|
|
CreateCircularSlot(double, double, double, double, double)
|
Creates a composite curve with the shape of a circular slot by position constructor.
(inherited from CompositeCurve).
|
|
CreateCircularSlot(double, double, double, double, double, double)
|
Creates a composite curve with the shape of a circular slot by position and start angle.
(inherited from CompositeCurve).
|
|
CreateHexagon(Plane, double, double, double, double, bool)
|
Creates an hexagonal composite curve by plane and position.
(inherited from CompositeCurve).
|
|
CreateHexagon(double, bool)
|
Creates an hexagonal composite curve.
(inherited from CompositeCurve).
|
|
CreateHexagon(double, double, double, double, bool)
|
Creates an hexagonal composite curve by position.
(inherited from CompositeCurve).
|
|
CreateRectangle(Plane, double, double, bool)
|
Creates a rectangular composite curve by plane.
(inherited from CompositeCurve).
|
|
CreateRectangle(Plane, double, double, double, double, double, bool)
|
Creates a rectangular composite curve by plane and position.
(inherited from CompositeCurve).
|
|
CreateRectangle(double, double, bool)
|
Creates a rectangular composite curve.
(inherited from CompositeCurve).
|
|
CreateRectangle(double, double, double, double, double, bool)
|
Creates a rectangular composite curve by position.
(inherited from CompositeCurve).
|
|
CreateRoundedRectangle(Plane, double, double, double, bool)
|
Creates a rounded rectangular composite curve by plane.
(inherited from CompositeCurve).
|
|
CreateRoundedRectangle(Plane, double, double, double, double, double, double, bool)
|
Creates a rounded rectangular composite curve by plane and position.
(inherited from CompositeCurve).
|
|
CreateRoundedRectangle(double, double, double, bool)
|
Creates a rounded rectangular composite curve.
(inherited from CompositeCurve).
|
|
CreateRoundedRectangle(double, double, double, double, double, double, bool)
|
Creates a rounded rectangular composite curve by position.
(inherited from CompositeCurve).
|
|
CreateSlot(Plane, double, double, bool)
|
Creates a composite curve with the shape of a slot by plane.
(inherited from CompositeCurve).
|
|
CreateSlot(Plane, double, double, double, double, double, bool)
|
Creates a composite curve with the shape of a slot by plane and position.
(inherited from CompositeCurve).
|
|
CreateSlot(double, double, bool)
|
Creates a composite curve with the shape of a slot.
(inherited from CompositeCurve).
|
|
CreateSlot(double, double, double, double, double, bool)
|
Creates a composite curve with the shape of a slot by position.
(inherited from CompositeCurve).
|
|
Dispose()
|
Cleans up graphics resources, like display lists, textures, etc.
(inherited from Entity).
|
|
Draw(DrawParams)
|
Draws the entity.
(inherited from CompositeCurve).
|
|
DrawDirection(DrawDirectionParams)
|
Draws a small arrow to show the entity direction if Environment.ShowCurveDirection is true.
(inherited from CompositeCurve).
|
|
DrawEdges(DrawParams)
|
Draws the entity's edges.
(inherited from Entity).
|
|
DrawEntity(RenderContextBase, object)
|
Internal method that draws the entity.
(inherited from Entity).
|
|
DrawFast(DrawParams)
|
Draws the entity in fast inaccurate transparency mode.
(inherited from Entity).
|
|
DrawFlat(DrawParams)
|
Draws entity in displayType.Flat DisplayMode.
(inherited from Entity).
|
|
DrawFlatFast(DrawParams)
|
Draws the entity in flat and fast inaccurate transparency mode.
(inherited from Entity).
|
|
DrawFlatSelected(DrawParams)
|
Draws entity selected in displayType.Flat DisplayMode.
(inherited from Entity).
|
|
DrawForSelection(GfxDrawForSelectionParams)
|
Draws the entity without specifing any color.
(inherited from Entity).
|
|
DrawForSelectionEdges(GfxDrawForSelectionParams)
|
Draws the entity edges in false-colors (for some kinds of entities only).
(inherited from Entity).
|
|
DrawForSelectionFaces(GfxDrawForSelectionParams)
|
Draws the entity faces in false-colors (for some kinds of entities only).
(inherited from Entity).
|
|
DrawForSelectionVertices(GfxDrawForSelectionParams)
|
Draws the entity vertices in false-colors (for some kinds of entities only).
(inherited from Entity).
|
|
DrawForSelectionWireframe(GfxDrawForSelectionParams)
|
Draws entity as wires without specifing any color.
(inherited from Entity).
|
|
DrawForShadow(RenderParams)
|
Draws the entity planar shadow.
(inherited from CompositeCurve).
|
|
DrawHiddenLines(DrawParams)
|
Draw the entity in the displayType.HiddenLines display mode.
(inherited from Entity).
|
|
DrawHiddenLinesFast(DrawParams)
|
Draw the entity in the displayType.HiddenLines display mode in fast inaccurate transparency mode.
(inherited from Entity).
|
|
DrawHiddenLinesMaterial(RenderParams)
|
(inherited from Entity).
|
|
DrawHiddenLinesMaterialFast(RenderParams)
|
(inherited from Entity).
|
|
DrawIsocurves(DrawParams)
|
Draws the entity iso curves. For Mesh entities this method draws internal wires.
(inherited from Entity).
|
|
DrawIsocurvesForFlat(DrawParams)
|
Draws the isocurves in Flat display mode.
(inherited from Entity).
|
|
DrawNormals(DrawParams)
|
Draws entity's normal vectors.
(inherited from Entity).
|
|
DrawOnScreen(DrawOnScreenParams)
|
Draws extra things on screen, like the vertex indices (if Viewport.ShowVertexIndices is true).
(inherited from Entity).
|
|
DrawOnScreen(DrawOnScreenParams, int)
|
Draws extra things on screen, like the vertex indices (if Viewport.ShowVertexIndices is true).
(inherited from Entity).
|
|
DrawOnScreenWireframe(DrawOnScreenWireframeParams)
|
Draws extra things on screen, like the vertex Numbers (if Viewport.ShowVertexIndices is true) in wireframe display mode.
(inherited from Entity).
|
|
DrawOnScreenWireframe(DrawOnScreenWireframeParams, int)
|
Draws extra things on screen, like the vertex Numbers (if Viewport.ShowVertexIndices is true) in wireframe dispaly mode.
(inherited from Entity).
|
|
DrawSelected(DrawParams)
|
Draws entity selected.
(inherited from Entity).
|
|
DrawSelectedVertices(DrawParams)
|
Draws the entity selected vertices.
(inherited from Entity).
|
|
DrawSilhouettes(DrawSilhouettesParams)
|
Draws Silhouettes.
(inherited from Entity).
|
|
DrawVertices(DrawParams)
|
Draws entity's vertices.
(inherited from Entity).
|
|
DrawWire(DrawParams)
|
Draws a wireframe entity, resolving the LineTypeName for LineTypeMethod colorMethodType.byParent.
(inherited from Entity).
|
|
DrawWireEntity(RenderContextBase, object)
|
Draws the Wireframe entity.
(inherited from Entity).
|
|
DrawWireframe(DrawParams)
|
Draws entity as wires.
(inherited from Entity).
|
|
DrawWireframeSelected(DrawParams)
|
Draws entity as selected wires.
(inherited from Entity).
|
|
DrawWithPattern(RenderContextBase, object)
|
(inherited from Entity).
|
|
Dump(linearUnitsType, massUnitsType, LayerKeyedCollection, MaterialKeyedCollection, BlockKeyedCollection)
|
Returns a description of this entity.
(inherited from CompositeCurve).
|
|
Equals(Object)
|
Determines whether the specified object is equal to the current object.
(inherited from Object).
|
|
EstimateBoundingBox(BlockKeyedCollection, LayerKeyedCollection)
|
Returns a small set of points that gives an idea of the entity bounding box.
(inherited from CompositeCurve).
|
|
EvaluateIntersectEdges(FrustumParams)
|
Tells if must evaluate the intersection of the edges with the frustum.
(inherited from Entity).
|
|
EvaluateIntersectTriangles(FrustumParams)
|
Tells if must evaluate the intersection of the triangles with the frustum.
(inherited from Entity).
|
|
Explode(bool)
|
Returns the list of curves as array of entities.
(inherited from CompositeCurve).
|
|
ExtrudeAsBrep(Line, double)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsBrep(Vector3D, double, double)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsBrep(double, double, double, double)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsMesh(Vector3D, double, natureType)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsMesh(double, double, double, double, natureType)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsMesh<T>(Vector3D, double, natureType)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsMesh<T>(double, double, double, double, natureType)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsSolid(Vector3D, double)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsSolid(double, double, double, double)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsSurface(Line)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsSurface(Vector3D)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsSurface(Vector3D, double, double)
|
(inherited from CompositeCurve).
|
|
ExtrudeAsSurface(double, double, double)
|
(inherited from CompositeCurve).
|
|
Finalize
|
Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(inherited from Object).
|
|
FindClosestTriangle(Transformation, Segment3D, IList<Point3D>, IList<IndexTriangle>, int, int, int, SortedList<DoubleHitTriangle>)
|
Finds the triangles intersecting the seg segment and puts them in the triList.
(inherited from Entity).
|
|
FindClosestTriangle(Transformation, Segment3D, float[], int[], int, int, int, SortedList<DoubleHitTriangle>)
|
Finds the closest triangle using float arrays for vertices and int arrays for triangles.
(inherited from Entity).
|
|
FrustumEdgesTriangleIntersection(Segment3D[], Point3D, Point3D, Point3D)
|
(inherited from Entity).
|
|
GetAllVertices(TraversalParams, out IList<Point3D>)
|
Gets tessellation vertices of the entity.
(inherited from CompositeCurve).
|
|
GetBb(out Point3D, out Point3D)
|
(inherited from CompositeCurve).
|
|
GetClosestMainAxis(Vector3D)
|
(inherited from Entity).
|
|
GetHashCode
|
Serves as the default hash function.
(inherited from Object).
|
|
GetIndividualCurves()
|
(inherited from CompositeCurve).
|
|
GetLengthFromParam(double, out double)
|
(inherited from CompositeCurve).
|
|
GetNormalLength()
|
Gets the entity normal length.
(inherited from Entity).
|
|
GetNurbsForm()
|
(inherited from CompositeCurve).
|
|
GetObjectData(SerializationInfo, StreamingContext)
|
Populates a SerializationInfo instance with the data needed to serialize the target object.
(inherited from CompositeCurve).
|
|
GetOffsetDistance(Vector3D, Vector3D, double)
|
Computes the offset distance for the extrude with draft angle methods.
(inherited from Entity).
|
|
GetParamFromLength(double, double, out double)
|
(inherited from CompositeCurve).
|
|
GetParamFromLength(double, out double)
|
(inherited from CompositeCurve).
|
|
GetPointsByLength(double)
|
Subdivides the curve by the distance provided.
(inherited from CompositeCurve).
|
|
GetPointsByLengthPerSegment(double)
|
Subdivides each segment of the curve by the distance provided.
(inherited from CompositeCurve).
|
|
GetPointsForConvexHull()
|
(inherited from CompositeCurve).
|
|
GetSelectability(Stack<BlockReference>)
|
Gets the entity selectability status.
(inherited from Entity).
|
|
GetSelection(Stack<BlockReference>)
|
Gets the entity selection status.
(inherited from Entity).
|
|
GetTightBBox(out Point3D, out Point3D)
|
(inherited from CompositeCurve).
|
|
GetType
|
Gets the Type of the current instance.
(inherited from Object).
|
|
GetVisibility(Stack<BlockReference>)
|
Gets the entity visibility status.
(inherited from Entity).
|
|
GetXAttributes(bool)
|
For internal use only.
(inherited from Entity).
|
|
GetXElement(bool)
|
For internal use only.
(inherited from CompositeCurve).
|
|
InitGraphicsData()
|
Initialize the graphics data.
(inherited from Entity).
|
|
InsideFrustumPoint(PlaneEquation[], Transformation, IList<Point3D>, int)
|
(inherited from Entity).
|
|
InsideOrCrossingFrustum(FrustumParams)
|
(inherited from Entity).
|
|
InsideOrCrossingFrustumInternal(PlaneEquation[], Transformation, IList<Point3D>, int, int)
|
(inherited from Entity).
|
|
InsideOrCrossingScreenPolygon(ScreenPolygonParams)
|
(inherited from Entity).
|
|
InsideOrCrossingScreenPolygonInternal(ScreenPolygonParams, IList<Point3D>, int, int)
|
(inherited from Entity).
|
|
InsideOrCrossingScreenPolygonPoint(ScreenPolygonParams, IList<Point3D>, int)
|
(inherited from Entity).
|
|
IntersectWith(ICurve)
|
(inherited from CompositeCurve).
|
|
IntersectionCircleCircle(Circle, Circle, Plane, out Point3D, out Point3D)
|
Finds the intersection between two Arc/Circle entities.
(inherited from CompositeCurve).
|
|
IntersectionCircleCircle3D(Circle, Circle, out Point3D, out Point3D)
|
Finds the intersection between two Arc/Circle entities.
(inherited from CompositeCurve).
|
|
IntersectionLineCircle(Line, Circle, Plane, bool, out Point3D, out Point3D)
|
Finds the intersection between an Arc/Circle and a Line entity.
(inherited from CompositeCurve).
|
|
IntersectionLineCircle(Line, Circle, Plane, out Point3D, out Point3D)
|
Finds the intersection between an Arc/Circle and a Line entity.
(inherited from CompositeCurve).
|
|
IntersectionLineCircle3D(Line, Circle, out Point3D, out Point3D)
|
Finds the intersection between an Arc/Circle and a Line entity.
(inherited from CompositeCurve).
|
|
IntersectionLineLine(ICurve, ICurve, Plane, out Point3D)
|
Finds the intersection between two coplanar Line entities
(inherited from CompositeCurve).
|
|
IntersectionLineLine(ICurve, ICurve, out Point3D)
|
Finds the intersection between two Line entities
(inherited from CompositeCurve).
|
|
IsAnyInstanceSelectable()
|
Tells if there is at least an instance selectable.
(inherited from Entity).
|
|
IsAnyInstanceSelected()
|
Tells if there is at least an instance selected.
(inherited from Entity).
|
|
IsAnyInstanceVisible()
|
Tells if there is at least an instance visible.
(inherited from Entity).
|
|
IsCrossing(FrustumParams)
|
Tells if the entity is inside or crossing the given planes and edges.
(inherited from Entity).
|
|
IsCrossingScreenPolygon(ScreenPolygonParams)
|
Tells if an entity is fully or partially contained inside a polygon defined in screen coordinates.
(inherited from Entity).
|
|
IsInFrustum(FrustumParams)
|
Tells if the entity is inside the frustum planes.
(inherited from Entity).
|
|
IsInFrustum(FrustumParams, Point3D, double)
|
Tells if the sphere surrounding the entity is inside the frustum planes.
(inherited from Entity).
|
|
IsInPlane(Plane, double)
|
(inherited from CompositeCurve).
|
|
IsLinear(double, out Segment3D)
|
(inherited from CompositeCurve).
|
|
IsOrientedClockwise(Plane)
|
Checks if the closed composite curve orientation is clockwise.
(inherited from CompositeCurve).
|
|
IsOrientedClockwise(Transformation)
|
Checks if the closed composite curve orientation is clockwise.
(inherited from CompositeCurve).
|
|
IsPlanar(double, out Plane)
|
Checks if the curve is planar.
(inherited from CompositeCurve).
|
|
IsSelected(Stack<BlockReference>)
|
Obsolete.
Tells if the instance referred by the stack of parents is selected.
(inherited from Entity).
|
|
IsSmall(IsSmallParams)
|
Checks if an entity is small and can be skipped during the drawing.
(inherited from Entity).
|
|
IsValid()
|
Returns true if all the entity fields contain reasonable information.
(inherited from CompositeCurve).
|
|
IsVisible(Stack<BlockReference>, LayerKeyedCollection, attributeReferenceVisibilityType)
|
Check if the entity is visible.
(inherited from Entity).
|
|
IsVisibleAndInFrustum(Stack<BlockReference>, LayerKeyedCollection, attributeReferenceVisibilityType)
|
Check if the entity is visible.
(inherited from Entity).
|
|
Length()
|
(inherited from CompositeCurve).
|
|
MemberwiseClone
|
Creates a shallow copy of the current Object.
(inherited from Object).
|
|
MoreOfTwoSegmentsIncidentOnTheSameEndpoint(double)
|
Check if the curve have more of two segments incident on the same endpoint.
(inherited from CompositeCurve).
|
|
NormalAt(double)
|
(inherited from CompositeCurve).
|
|
Offset(double, Vector3D, double, bool)
|
(inherited from CompositeCurve).
|
|
Offset(double, bool)
|
(inherited from CompositeCurve).
|
|
OffsetToRegion(double, double, bool)
|
(inherited from CompositeCurve).
|
|
PointAt(double)
|
(inherited from CompositeCurve).
|
|
Project(Point3D, out double)
|
(inherited from CompositeCurve).
|
|
PropagateAttributes(Entity, Entity, bool)
|
Propagates the attributes to the entity passed as parameter.
(inherited from Entity).
|
|
Regen(RegenParams)
|
This method is used for several purposes. For example in arcs and circles
is used to generate the curve's linear approximation, in meshes to compute normals
and edges and in Nurbs surfaces to generate the triangulation.
(inherited from CompositeCurve).
|
|
RegenNoChanges(double)
|
Computes an array of vertices according to the desired chordal error, without changing the entity's Vertices and RegenMode.
(inherited from Entity).
|
|
Render(RenderParams)
|
Renders the entity.
(inherited from Entity).
|
|
RenderFast(RenderParams)
|
Renders the entity in fast inaccurate transparency mode.
(inherited from Entity).
|
|
Reverse()
|
(inherited from CompositeCurve).
|
|
RevolveAsBrep(double, double, Line, double)
|
(inherited from CompositeCurve).
|
|
RevolveAsBrep(double, double, Point3D, Point3D, double)
|
(inherited from CompositeCurve).
|
|
RevolveAsBrep(double, double, Vector3D, Point3D, double)
|
(inherited from CompositeCurve).
|
|
RevolveAsMesh(double, double, Point3D, Point3D, int, double, natureType)
|
(inherited from CompositeCurve).
|
|
RevolveAsMesh(double, double, Vector3D, Point3D, int, double, natureType)
|
(inherited from CompositeCurve).
|
|
RevolveAsMesh<T>(double, double, Point3D, Point3D, int, double, natureType)
|
(inherited from CompositeCurve).
|
|
RevolveAsMesh<T>(double, double, Vector3D, Point3D, int, double, natureType)
|
(inherited from CompositeCurve).
|
|
RevolveAsSolid(double, double, Point3D, Point3D, int, double)
|
(inherited from CompositeCurve).
|
|
RevolveAsSolid(double, double, Vector3D, Point3D, int, double)
|
(inherited from CompositeCurve).
|
|
RevolveAsSurface(double, double, Line)
|
(inherited from CompositeCurve).
|
|
RevolveAsSurface(double, double, Point3D, Point3D)
|
(inherited from CompositeCurve).
|
|
RevolveAsSurface(double, double, Vector3D, Point3D)
|
(inherited from CompositeCurve).
|
|
Rotate(double, Vector3D, Point3D)
|
Rotates the entity around an arbitrary axis by the specified angle.
(inherited from Entity).
|
|
Rotate(double, Point3D, Point3D)
|
Rotates the entity around an arbitray axis by the specified angle.
(inherited from Entity).
|
|
Rotate(double, Vector3D)
|
Rotates the entity around an arbitray axis by the specified angle.
(inherited from Entity).
|
|
Scale(Point3D, double, double, double)
|
Scales the entity of the specified scale factor.
(inherited from Entity).
|
|
Scale(Point3D, double)
|
Scales the entity of the specified scale factor.
(inherited from Entity).
|
|
Scale(Vector3D)
|
Scales the entity of the specified scale factor.
(inherited from Entity).
|
|
Scale(double)
|
Scales the entity of the specified scale factor.
(inherited from Entity).
|
|
Scale(double, double, double)
|
Scales the entity of the specified scale factor.
(inherited from Entity).
|
|
SelectedInternal()
|
Tells if the entity has internal parts selected
(inherited from Entity).
|
|
SetEntityColorForFace(DrawParams, Color)
|
Sets the entity color or material depending on the color mode.
(inherited from Entity).
|
|
SetEntityColorForSelection(DrawParams)
|
Sets the entity color or material depending on the color mode.
(inherited from Entity).
|
|
SetLineWeight(RenderContextBase, float)
|
Line weight changer.
(inherited from Entity).
|
|
SetLineWeightForEdges(DrawEdgesParams)
|
(inherited from Entity).
|
|
SetLineWeightForSilhouettes(DrawSilhouettesParams)
|
(inherited from Entity).
|
|
SetSelectability(bool, Stack<BlockReference>)
|
Sets the entity selectability status.
(inherited from Entity).
|
|
SetSelection(bool, Stack<BlockReference>)
|
Sets the entity selection status.
(inherited from Entity).
|
|
SetSelectionColorForSelection(DrawParams)
|
Sets the selection color or material depending on the color mode.
(inherited from Entity).
|
|
SetShader(DrawParams)
|
Sets a Shader before drawing the entity.
(inherited from Entity).
|
|
SetVisibility(bool, Stack<BlockReference>)
|
Sets the entity visibility status.
(inherited from Entity).
|
|
SortAndOrient()
|
Sorts and orients internal curves. Closure tolerance is estimated automatically using composite curve extents.
(inherited from CompositeCurve).
|
|
SortAndOrient(double)
|
Sorts and orients internal curves.
(inherited from CompositeCurve).
|
|
SplitAt(double, out ICurve, out ICurve)
|
(inherited from CompositeCurve).
|
|
SplitAtDiscontinuities(bool)
|
Splits the composite curve at derivative discontinuities (e.g. cusps, kinks) of each segment, returns an array of smooth segments.
(inherited from CompositeCurve).
|
|
SplitBy(IList<Point3D>, out ICurve[])
|
(inherited from CompositeCurve).
|
|
SplitBy(Point3D, out ICurve, out ICurve)
|
(inherited from CompositeCurve).
|
|
SubCurve(Point3D, Point3D, out ICurve)
|
(inherited from CompositeCurve).
|
|
SubCurve(double, double, out ICurve)
|
(inherited from CompositeCurve).
|
|
SweepAsBrep(ICurve, double, sweepMethodType)
|
(inherited from CompositeCurve).
|
|
SweepAsBrep(ICurve, double, bool, sweepMethodType)
|
(inherited from CompositeCurve).
|
|
SweepAsMesh(ICurve, double, sweepMethodType, natureType)
|
(inherited from CompositeCurve).
|
|
SweepAsMesh(ICurve, double, bool, sweepMethodType, natureType)
|
(inherited from CompositeCurve).
|
|
SweepAsMesh<T>(ICurve, double, sweepMethodType, natureType)
|
(inherited from CompositeCurve).
|
|
SweepAsMesh<T>(ICurve, double, bool, sweepMethodType, natureType)
|
(inherited from CompositeCurve).
|
|
SweepAsSolid(ICurve, double, sweepMethodType)
|
(inherited from CompositeCurve).
|
|
SweepAsSolid(ICurve, double, bool, sweepMethodType)
|
(inherited from CompositeCurve).
|
|
SweepAsSurface(ICurve, double, sweepMethodType)
|
(inherited from CompositeCurve).
|
|
TangentAt(double)
|
(inherited from CompositeCurve).
|
|
ThroughTriangle(FrustumParams)
|
(inherited from Entity).
|
|
ThroughTriangleQuad(FrustumParams, IList<Point3D>)
|
Tells if the quad defined by the vertices is inside the selection area defined by the edge list.
(inherited from Entity).
|
|
ThroughTriangleScreenPolygon(ScreenPolygonParams)
|
(inherited from Entity).
|
|
ThroughTriangleScreenPolygon(Point3D, Point3D, Point3D, ScreenPolygonParams)
|
Checks whether a triangle intersects or is inside a 2D screen polygon.
(inherited from Entity).
|
|
ThroughTriangleScreenPolygonQuad(IList<Point3D>, ScreenPolygonParams)
|
Tells if the quad defined by the vertices is inside the selection area defined by the screen polygon.
(inherited from Entity).
|
|
ToString
|
Returns a string that represents the current object.
(inherited from Object).
|
|
TransformAllVertices(Transformation, bool, bool)
|
(inherited from Entity).
|
|
TransformAllVerticesRecursive(Transformation)
|
(inherited from CompositeCurve).
|
|
TransformBy(Transformation)
|
Transforms all the entity's vertices by the specified transformation.
(inherited from CompositeCurve).
|
|
Translate(double, double, double)
|
Translates the entity.
(inherited from Entity).
|
|
Translate(Vector3D)
|
Translates the entity.
(inherited from Entity).
|
|
TrimAt(double, bool)
|
(inherited from CompositeCurve).
|
|
TrimBy(Point3D, bool)
|
(inherited from CompositeCurve).
|
|
UpdateBoundingBox(TraversalParams)
|
Updates the entity's bounding box.
(inherited from Entity).
|
|
UpdateBoundingBoxSphere()
|
(inherited from Entity).
|
|
UpdateOrientedBoundingBox(TraversalParams)
|
Updates the entity's oriented bounding box or build it if not present.
(inherited from Entity).
|
|
UpdateOrientedBoundingBox(TraversalParams, bool)
|
Updates the entity's oriented bounding box or build it if not present.
(inherited from Entity).
|
|
WriteObjAsLines(ref int, TextWriter, ref int, ref int, ref int, TextWriter, LayerKeyedCollection, string, MaterialKeyedCollection, double, double, BlockKeyedCollection)
|
Write in Obj file format as set of lines connecting vertices.
(inherited from Entity).
|
|
WriteUsemtl(int, TextWriter, TextWriter, LayerKeyedCollection)
|
(inherited from Entity).
|
|
WriteUsemtl(string, TextWriter)
|
(inherited from Entity).
|
|
WriteXml(XmlTextWriter)
|
(inherited from CompositeCurve).
|